An arc may be formed between pieces of metal, called electrodes, in the
same way as between carbon. The metallic arc is called a flaming arc and as
the metal of the electrode burns with the heat, it gives the flame a color
characteristic of the material being used. The metallic arc may be drawn
out to a much greater length than one formed between carbon electrodes.
Arc Welding is carried out by drawing a piece of carbon which is of
negative polarity away from the pieces of metal to be welded while the
metal is made positive in polarity. The negative wire is fastened to the
carbon electrode and the work is laid on a table made of cast or wrought
iron to which the positive wire is made fast. The direction of the flame is
then from the metal being welded to the carbon and the work is thus
prevented from being saturated with carbon, which would prove very
detrimental to its strength. A secondary advantage is found in the fact
that the greatest heat is at the metal being welded because of its being
the positive electrode.
The carbon electrode is usually made from one quarter to one and a half
inches in diameter and from six to twelve inches in length. The length of
the arc may be anywhere from one inch to four inches, depending on the size
of the work being handled.
While the parts are carefully insulated to avoid danger of shock, it is
necessary for the operator to wear rubber gloves as a further protection,
and to wear some form of hood over the head to shield him against the
extreme heat liberated.
Pages:
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158